3 Wheeler Lights
The rear lights and rear number plate mounting were taken from the motorbike frame. These were connected up to the existing electrical harness using the existing connectors.
The front lights needed a complete redesign because 2 lights were now needed instead of one. We needed lights that were external self contained pods, an obvious donor vehicles for such lights was the Citreon 2CV. We found a suitable set in a local breakers yard for £15. They needed a bit of attention and a good cleaning but were sufficient for what we wanted. They were attached to the frame of the vehicle using a mounting bracket that would allow full adjustability of the lights.
The front indicators were made out of motorbike indicators mounted on a simple aluminium bracket. The switch for the indicators was made form a simple toggle switch mounted on the top of the steering column.
